Stihl

MS 362 C-M VW Chainsaw

Name: MS 362 C-M VW Chainsaw
Brand: Stihl
Availability: OutOfStock

1 335,00 €

Financial example: 36 €/kk lisätietoja

Deposit: 267 €

Share of funding: 1068 €

Establishment fee: 250 €

Interest: 7.9 %

Handling fee: 15 €/kk

Remnant: 30 %

Share of funding: 400 €

Monthly payment(60/kpl): 36 €/kk

The financial calculation is indicative and requires an approved credit decision

For all forestry work. Air filter system with long service life and HD2 filter, M-Tronic electronic engine management system, and an easy-to-use master control lever, electrically heated handles and carburetor, captive nuts on the sprocket cover for quick and easy saw chain replacement, economical 2-MIX engine. Equipped with an innovative Light 04 guide bar.

Shipping costs starting from 16,90 €

I want to be notified when the product is available again.

chainsaw

Technical data

Technical dataValue

Guide bar length cm40

Guide bar length inches in16

Displacement cm³59

Power kW/hp3.5/4.8

Weight kg 1)5.8

Power-to-weight ratio kg/kW1.7

Total weight kg 2)6.8

Sound pressure level dB(A) 3)106

Sound power level dB(A) 3)117

Vibration level left/right m/s² 4)3.5/3.5

Chain pitch3/8"

Tilavuus:	59 cm³
Teho:	3.5/4.8 kW/hp
Paino:	5.8 kg without fuel, guide bar and saw chain
Paino-tehosuhde:	1.7 kg/kW
Terälevyn pituus:	40 cm
CO2-arvo:	711 g/kWh
Äänenpaine:	106 dB(A) K-Factor according to Directive 2006/42/EG = 2.5 dB(A)
Ääniteho:	117 dB(A) K-Factor according to Directive 2006/42/EG = 2.5 dB(A)
Tärinätaso vasen/oikea:	3.5/3.5 m/s² K-Factor according to Directive 2006/42/EG = 2 m/s²
Säiliön tilavuus:	0.60 l
Yhdistelmäkatkaisin:	Thanks to M-Tronic's ability to electronically distinguish between cold and warm starts, the master control lever has only one start position. The system calculates the required fuel quantity for each start. This means you don't have to worry about whether your machine has just been used or not – and thus you get full power from your machine immediately, even after a long break (cold start). When you switch off the machine, the master control lever returns to the operating position, thanks to the stop button (in most M-Tronic models). This allows the engine to start very easily after a short break.
Kompensaattori:	The STIHL compensator monitors the carburetor to ensure that the fuel-air mixture is always in an optimal ratio, depending on the filter's contamination level. The compensator enables low emissions and optimal power. When you notice that the power clearly decreases, it's time to clean the filter. The filter cleaning interval is significantly extended.
Purusuojan kiinteät mutterit:	When you need to open the nuts on the sprocket cover, for example, to change the saw chain, the nuts remain firmly attached to the sprocket cover. There is no longer any fear of losing the nuts. This significantly simplifies things for the user.
STIHL 4-kanavainen huuhtelutekniikka:	The fuel/air mixture is directed into the combustion chamber through 4 different transfer channels. Combustion is optimal, and engine power increases significantly. The result: lower fuel consumption, increased power, and reduced harmful emissions.
Talvi-/kesäasento:	You can rely on your STIHL chainsaw's carburetor even in the cold season: Set your chainsaw to winter mode, which circulates warm air to the carburetor. This prevents ice from forming in the carburetor. Simple operation helps with both summer and winter use.
STIHL M-Tronic (M) :	The electronic engine management system automatically adjusts the optimal ignition timing and fuel mixture, ensuring the best possible engine power, constant torque, and excellent acceleration. So, when external conditions remain the same, full engine power is continuously available to you after each restart. Thanks to M-Tronic's ability to electronically distinguish between cold and warm starts, the master control lever has only one start position. The system calculates the required fuel quantity for each start. This means you don't have to worry about whether your machine has just been used or not – and thus you get full power from your machine immediately, even after a long break (cold start). When you switch off the machine, the master control lever returns to the operating position, thanks to the stop button (in most M-Tronic models). This allows the engine to start very easily after a short break.
Tankkien pikalukituskorkit:	Patented closure method for fuel and oil tanks. The cap is sealed with a bayonet fitting, which makes opening and closing the cap very easy, without tools.
STIHL Ematic ketjunvoitelujärjestelmä:	Compared to a conventional guide bar without the Ematic system, the STIHL Ematic system saves up to 50% chain oil, depending on the wood type and saw chain. The system synchronizes the STIHL Ematic or Ematic S guide bar with the STIHL Oilomatic saw chain and oil pump. As a result, the chain oil flowing into the guide bar groove adheres to the rotating saw chain without loss.